Hi, I have the same problem described above and after following the procedure suggested by testspa, the Dir Sync Service remains 'starting' and the AXL failure occurs over and over again. It's the 3rd time I reinstall the CUP server; I have also tried to update it but I must give up. I don't know what's going on but it isn't normal. DAniV ... View more

Hello everybody I tried to remove the virtual reassembly commands from both vlan 1, vlan 2 and di0 but no results. In my initial config there was ip tcp adjust-mss 1452 on vlan 1 and mtu 1492 on di0 but it didn't work. I tried to remove it and, how it didn't work, I configured them again but no results again. I can't paste the output of shows int and ip nat trans because the customer has cancelled the project. Today it's going to be one of these days. Thank you all for the interest shown DAni ... View more

I have tried with DNS 4.4.2.2 but we are unable to resolve URLs. The IP addess the customer get is one from the pool 192.168.5.100 to 192.168.5.254 but now we are trying with 192.168.5.50, as you can see on the ip nat translations: ... View more

The current config: version 15.1 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname rtr1 ! boot-start-marker boot-end-marker ! ! ! no aaa new-model memory-size iomem 10 clock timezone CET 1 0 clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00 crypto pki token default removal timeout 0 ! ! ip source-route ! ! ! ip dhcp excluded-address 192.168.5.0 192.168.5.99 ! ip dhcp pool DATOS    network 192.168.5.0 255.255.255.0    default-router 192.168.5.1    dns-server 8.8.8.8 ! ! ip cef no ip domain lookup no ipv6 cef ! ! license udi pid CISCO887M-K9 sn xxxxx ! ! archive log config   hidekeys username xxxxx privilege 15 secret 5 x ! ! ! ! ! ! ! ! ! ! ! interface BRI0 no ip address encapsulation hdlc shutdown isdn termination multidrop ! interface ATM0 no ip address shutdown no atm ilmi-keepalive ! interface FastEthernet0 spanning-tree portfast ! interface FastEthernet1 spanning-tree portfast ! interface FastEthernet2 spanning-tree portfast ! interface FastEthernet3 switchport access vlan 2 spanning-tree portfast ! interface Vlan1 ip address 192.168.5.1 255.255.255.0 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1452 ! interface Vlan2 no ip address pppoe-client dial-pool-number 1 ! interface Dialer0 mtu 1492 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer-group 1 fair-queue ppp authentication chap pap callin ppp chap hostname adslppp@telefonicanetpa ppp chap password 7 13041301071C143A ppp pap sent-username adslppp@telefonicanetpa password 7 1416161800143A3B ! ip forward-protocol nd no ip http server no ip http secure-server ! ip nat inside source route-map NAT interface Dialer0 overload ip route 0.0.0.0 0.0.0.0 Dialer0 ! ip access-list extended NAT permit ip 192.168.5.0 0.0.0.255 any ! logging esm config ! ! ! ! route-map NAT permit 10 match ip address NAT ! ... View more

Hi, the tests I've done froma PC on the customer network: - ping 8.8.8.8 , OK - ping www.google.es and other url. Always resolves the URL into a public IP and the pings response - repeat the tests with a LAN fixed IP address or DHCP. Same results - change DNS: 8.8.8..8 or ISP provided or even others. Same results - obviously I can ping the default-gateway. - I can start PPTP sessions to hosts on the outside with no problem and access remote servers via VPN and the best one: - I'm not on customer's site right now but I have remote Telnet to the router and teamviewer access to a PC that can't browse the Internet!! What am i missing? DAni ... View more