Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I got a question for you guys if someone can help me. Can i use the managment interface vlan lets say its vlan 100 for my access points also? Or do i have to create another vlan on another subnet? Like, can i have my Wlan ssid (internal) to be assign...
I have a network consisting of a controller, switch, mikrotik router and access points. Everything is fine (aps are communicating with the controller and the router and have the router as a dhcp server) but when i join a SSID i created i dont have in...
Hi! I have a network consisting of 1 router as a dhcp server which is connected to the main switch (SW-MAIN) , this switch has 1 controller connected and is also connected with multiple PoE switches with APs on them. The router has an ip of 10.10.10....
I have a lab that has 1 c2960cx switch, 1 WLC and 1 AP. I want the WLC to have 2 SSIDS(Wlans) on 1 AP, one for Internal users and 1 wlan for Guests. Can i somehow make it that theres 2 dhcp pools with 2 different subnets, one assigned for internal, ...
Okay so i have another question. I have everything on vlan 100 (the managment and the aps). I have a mikrotik router which is giving out dhcp ips to the network. The controller can ping and gets ips from the router and also the aps are getting ip add...
Unfortunately at this time i dont have access to the devices since they are not mine, im just working with these devices. If u need to ask anything specific just ask and ill answer you
Im using vlan 100, switch to controller is set to trunk and also switch to router is set to trunk and switch to ap is set to access vlan 100. The aps are getting ips from the dhcp server but when i create a Wlan SSID and join it with any device the d...
hmm so heres what i did and its not working for me - my switch is connected to the wlc on port gig0/1 and the access point is connected to the switch on port gig0/2. First i created 2 vlans on the switch, vlan 10 for internal and vlan 20 for guests ...
