Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone!I have a MPLS network with about 50 WAP's (AIR-AP1852I-Z-K9) and WLC that connected to DHCP server and everything was working fine. we recently added a new site and for new site we couldn't use fiber link so we decided to use Cradle point...
Hey Guys,I Have several 1600 Series AP's (AIR-CAP1602I-ZK9) that was working with WLC before, I changed them with 1800 series but would like to use 1600 Access Points series independently and without WLC for somewhere else, so I want to know do they...
Hello Guys,I have a 1600 Series AP (AIR-CAP1602I-ZK9), I wanted to upgrade the firmware but after extract I got this error :Interrupt within 5 seconds to abort boot process.Loading "flash:/update/ap1g2-k9w7-mx.152-4.JA1/ap1g2-k9w7-mx.152-4.JA1"...###...
Hello everyone,I have WLC with 50 AP's and just bought some new AP's (AIR-AP1852I-Z-K9) but not joining or discovery by my cisco controller.(Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Na...
Hi Leo, Thanks for your help, I loaded with Autonomous IOS all is ok but when I login on web gui and try save or apply anything I get error 404 not found!is it because of software version issue? I'm using : ap1g2-k9w7-tar.153-3.JF12iThanks
Yes Thanks I saw it, because I have several 1600 Series AP's and need to loaded all of them with Autonomous IOS.I will try again and I hope to solve it soon,Thanks for your help
