Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i,Wondering if anyone has any experience configuring wired guest access as per this link:https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-1/config-guide/b_wl_17_11_cg/wired-guest.htmlThere are a few restrictions, notably:Every guest ...
i There,Just in the process of following this guide:https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-1/config-guide/b_wl_17_11_cg/wired-guest.htmlI've got to this section:Step 6
Choose Configuration > Wireless > Guest LAN > Guest LA...
Hi,Currently have a couple of C9800 controllers in a LAB environment for a POC. They both at this time connect to the same switch but on different subnet's so no firewall to consider. Each WLC can ping each other, yet I am struggling to bring up the ...
So close, I've replace the VLAN 200 with VLAN ID 555 and VLAN 25 on the foreign controller with 555 and now getting the following error on the foreign controller: Aug 10 21:50:31.360: %MM_LOG-4-EXPORT_ANCHOR_DENY: Chassis 1 R0/0: mobilityd: Export an...
So close, I've replace the VLAN 200 with VLAN ID 555 and VLAN 25 on the foreign controller with 555 and now getting the following error on the foreign controller:Aug 10 21:50:31.360: %MM_LOG-4-EXPORT_ANCHOR_DENY: Chassis 1 R0/0: mobilityd: Export anc...
Thanks Scott.Yeah, realised after the post and been using the commands, which have been taking OK.Not got it working yet mind you, but still trying to work it out.Will see about doing an upgrade and post back if it helps.Cheers
Notice on the other controller the following error:%DTLS_TRACE)MSG-3-EWC_DTLS_ERR: Chasis 1 R0/0: mobilityd: DTLS Error, session:192.168.0.222[16666], Certificate validation failedCert verify Error, SCC validation failure, Reason: certificate is not ...
