cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1001
Views
0
Helpful
5
Replies

Gust VLAN missing C9800

Flambo
Level 1
Level 1

i There,

Just in the process of following this guide:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-1/config-guide/b_wl_17_11_cg/wired-guest.html

I've got to this section:

Step 6 
Choose Configuration > Wireless > Guest LAN > Guest LAN Configuration

But I can not find it:

WLC08.png

Currently running version 16.12.3

So my question is if it isn't there, where is it or how else can I configure guest wired VLAN?

Many thanks in advance.

 

5 Replies 5

Scott Fella
Hall of Fame
Hall of Fame
Did you configure your mobility first? Guest wired requires anchoring to another controller.
-Scott
*** Please rate helpful posts ***

Hi Scott,

Thanks for posting a reply

I did, it is showing up on both controllers. This is taken from one of the controllers:

WLC09.png

Thanks.

 

Well I’m running a beta 17.3 and the Guest Lan does show up there. You might just want to upgrade and see.
-Scott
*** Please rate helpful posts ***

You should also refer to the guide for the code you are running.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-12/config-guide/b_wl_16_12_cg/wired-guest.html?bookSearch=true <>

You might want to just try it from the CLI if it doesn’t show up on your UI. The commands are listed on the link above.
-Scott
*** Please rate helpful posts ***

Thanks Scott.

Yeah, realised after the post and been using the commands, which have been taking OK.

Not got it working yet mind you, but still trying to work it out.

Will see about doing an upgrade and post back if it helps.

Cheers

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card