Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
At the moment we are updating our Datacenter Fabric Environment. Coming from DCNM 11.5.1 we've installed Nexus Dashboard 2.1.2d and NDFC 12.0.2f. After installation we've Installed the Backup from the Original DCNM successfull.Nexus Switch Software V...
Hallo,we like to Update our Nexus Switches into our Datacenter Fabric. After the Image Upload is successfull done, the Validation show's the following Errormesssage:the md5 Hash of the File was checked and ok.Best regards
Hello,
on our WLC's (8510 + 2504s) we are using WPA2 Personal together with Mac Filtering and AAA Override.
This config helps us to bring Devices flexible into the Network, like MAB on the Wired Side.
I've tried to configure that on our Mobility Ex...
Hi,
i couldn't register two of the AP's above over our WAN.
A same AP (AIR-AP2802I-E-K9) connected in a routed Network next to the WLC is working fine.
WLC is a 2504 with the newest SW (8.3.112.0) in our LAB.
I can see the CAPWAP Join Packet into the...
I've tried to upgrade our 4503 Sup8E VSS Switch via ISSU described here:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1-2/XE_340/configuration/guide/config/vss.html
I've tried the one step and the four step method without success...
Hi,
thank you for your Config.
It is working now in my LAB.
And what i forgot to tell even with VLAN rewrite via Radius!
We are using an alternative NAC Radius Server based on Freeradius here.
Finaly i've to wait for the test into our Production En...
