Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a PIX515E running 6 interfaces, I have a DMZ interface with a Server running IPSwitches WS_FTP Server on it. I have a Static NAT from the outside to a Public IP address. The FTP Server is truely set up on a private IP address on the DMZ inter...
We have just begun a changeover to a new ISP, So currently have 2 Internet Routes. Because we are also having to change our IP addressing, I have set up the second ISP connection via another Interface on the Firewall. We have a DMZ coming off a 3rd...
You can use the “use-kstack” syntax with the copy command on the nexus switches to increase the speed of the copy commands. See attached documentation for details.https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammabil...
Use the use-kstack syntax at the end of your SCP or SFTP copy command to increase throughput. See Documentation for details: Cisco Nexus 9000 Series NX-OS Programmability Guide, Release 9.3(x) - Bash [Cisco Nexus 9000 Series Switches] - Cisco
The following site has information on Switchport Port-Security. What your seeing is called a MAC move violation. When Port security is set up on a port, and the same address is set up on a different port in the same VLAN, it puts the port into viol...
I think it should be added that if you do a Syslog over TCP, that the PIX will buffer the logs if the syslog server is down. This is good, unless the buffer gets to big, in which case the PIX will no longer accept new connections.
