hi
"start-up config" was re-entered after an unknown reboot.
I've never seen anything like this before.
What's wrong with this?- Is it an archive problem?
Furthermore, it appears that the user who accessed it remotely entered the command.
We've n...
Hi Last time I accessed C4506 remotely via ssh and used the show tech-support command. The result is a hardware fault. I try to access the C4056 through the console and run the show tech-support command. Is it more secure than ssh?
HI I want to adjust the mtu value on cisco nexus 3064 switch For the device, the mtu value can be adjusted in the individual interface for the L3 port, but it must be adjusted through the qos setting (global setting) for the L2 port. see cisco guideh...
Hi I am trying to build Webex calling. When it is necessary to link the head office and branch with SIP, Can the PSTN perform the SBC function? PSTN - PSTN_GW - Webex Calling l Branch(SIP connect)
Thank you for your kind answer.! ! Last configuration change at 10:34:35 KST Fri Mar 11 2022! ! NVRAM config last updated at 13:52:16 KST Thu Apr 21 2022The system was is the one who shut those ports down. If it was someone else, it would show up her...
show runBuilding configuration...
Current configuration : 15658 bytes!! Last configuration change at 10:34:35 KST Fri Mar 11 2022 ! NVRAM config last updated at 13:52:16 KST Thu Apr 21 2022 !version 16.9
For your information, an unknown reboot oc...
It's a log from the past. There is no latest log.
#show platform resource**State Acronym: H - Healthy, W - Warning, C - Critical Resource Usage Max Warning Critical State----------------------------------------------------------------------------...
