Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Would you please let me know is there any way to change the HTTP header value (X-Forwarded-Proto) using the CSS 11500 series switch?I tried searching in google and cisco couldn't find any links related to this.Would be much helpful if someone can ...
Hiplease can some one advice me is it possible to load balance servers in two different routed network using CSS.It is very urgent. It would be helpful if some one can reply me asap.Thanks in Advance.
HiIn my office we are using 6509 switch for server load balancing thr IOS SLB. I have configured 4 VServerfarm on this switch. (I configured as suggested in Cisco site for IOS slb)Everything works fine as we expected. But the problem is if I add or a...
Hi,I am trying to place local Director to load balance for 8 terminal servers.The network setup is like this.VLAN 10 - 192.168.1.x / 24 Cisco 3550 - Fa0/0 -------------Ã user NetworkCisco 3550 - Fa0/1 -----------Ã Local Director (User Facing In...
Hi,static NAT to third party is applied on PIX. One NAT is working fine another is not working now before it was. I compared the ACL with the working one both are same. It seems the second NAT is not being active. Please advise me how can I fix this ...
Thanks for your reply.Yes, I tried it for port 23...but unsuccessful.... in place of Server I used a router (assigned only IP address & Default route to its ethernet interface. no other config on that)
