Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am trying something not sure if it can work or not. Here it is simply put.I have a Cisco 3550 running an EMI image. It has a cross connect to a 2950T cisco switch. I am trying to put through VLAN 3 and 63 from the 3550 to the 2950, I usually ...
Hello,We have been running on a 3550-48 port switch a about 2 years now with no problem. Recently, we got our new set of IP's and wanted to assign a subnet of 8 IP's to each customer. Therefore to plan ahead and to be ready for implementation, we wen...
Hello,For the past two days, we have been having a really strange lag. There is a lag between our switch and our providers and they are directly linked via a Fiber SC line in the same datacenter. We usually get <1 ms lag, now it goes up to 60 MS some...
Hello,We need some expert advice on how to manage + setup the IP's and vlans for our dedicated server customers.We have 2 /22 IP range to provide all our dedicated server clients. We are in the business of dedicated server rental. Currently we setup ...
Hello,We currently have 2 Cisco 3550 EMI versions in our network. Everything is done in Static Mode presently. We have 2 providers to which we advertise our IP's manually. So we simply tell them our routes and they add them in their BGP and for outgo...
Hello,yes I can post that, the only thing is that those are Dedicated Server Customers and we do not have access to all the servers or want to manually configure over 300 servers and not all NIC will be the same, therefore we cannot rely on that solu...
yes but if I change it to Vlan 63 then the customer will lose the IP connectivity he had from VLAN 3 ...What is (apart from the server's nic config) the way for that server to talk to BOTH VLAN3 and VLAN63 at the SAME time so he can migrate smoothly ...
Hello,This is what we are trying to do. For example server 63 in our inventory is currently on VLAN 3... we need to migrate it on its OWN vlan which is Vlan 63 which sits on completely different IP's therefore two different gateways. We need to give ...
In addition to the post above, the problem seems to be because in the 2950 switch the port is set to static access on VLAN 3, that is why it can only talk to ONE VLAN, the intervlan routing is done, I know that. The problem is on that level and I can...
