Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I would like to know, if I use a basic 5510 with SSM-4GE module, how many active interface I have available?I need 8 interfaces, do I need a special license for that?http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.htmlThank...
Hi there,My customer has a 2950T-24 using WS-G5486 GBICs in one building and in the other he uses WS-2060s with GLC-LH SFPs. Fiber runs between the 2 buildings. What sort of media converter do I need on each end to connect the switches? Please advise...
Hi guys,I know that the major difference between 4700 and 4500 is the processor speed.133MHz for 4700, and 100MHz for 4500.Can I "transform" the 4500 into a 4700 if I change the processor card? How can I do that?There are some info somewhere for this...
Hi there,Currently I have 3 Linksys wireless routers one on each floor of our office.WRT54G - Wireless-G Broadband Router However, they are not working very well, and continuously dropping connection.We are looking for a more corporate robust wireles...
Hello, I'm new on 7200 Series, I have one in my lab in the following configuration:7206 VXRI/O ControlerPA-FENPE40020MB flash card externI would like to ask, what is about with this flash card, there is Router#sh flash-#- ED ----type---- --crc--- -se...
ok, I find that The 4GE Security Services Module (SSM) has eight Ethernet ports: four 10/100/1000 Mbps, copper, RJ-45 ports or four optional 1000 Mbps, Small Form-Factor Pluggable (SFP) fiber ports. The next question is can I mix these ports, I mean ...
Thank you for the message, I was wondering what shoul recommend for the other end, GLC-LH.I have the fiber goes in Gbic and in the other end I have only one GLC-LH.There are some modules in the patch panel that convert the two wires to one?
Thank you for the sugestion.I was fixing this problem by deleting the old ios from bootflash: and puting there a new one, via tftp.c7200-boot-mz.120-22.S5And the router boots without flashcard, no errors, everything seems to be fain.PS: The link prov...
