About laurence-smith

laurence-smith · 06-06-2005

Hi all,Does anybody have a working config for bridging a subnet between GRE hosts.?I need to extend a subnet across any IP background for some temp testing so i am using a couple of 3620's.I know the bridge-group option on the tunnel interface works ...

laurence-smith · 11-16-2004

Hi,Is it possible to restrict traffic types over a site to site vpn with PIX. I am looking to restrict traffic to smtp, ping and pop3.I have the vpn working at the moment, but every time I change the access-list it stops working! I have also tried ap...

laurence-smith · 11-16-2004

Hi Jay,I enclose the central and remote site configs with the modified crypto acl's. The tunnel will initiate with this but will not forward traffic. If i set the crypto acl back to subnet to subnet it works fine..!I have found an extract in the manu...

laurence-smith · 11-16-2004

Hi, Thanks for the info. I have been doing this and the tunnel initiates but does not forward traffic. The access-list shows the rule is being hit.My nat 0 rule is set site to site 192.168.1.0/24 to 192.168.2.0/24. But if i go back to my original con...

laurence-smith · 06-05-2003

KoenI too am having this issue where machine group policy is not being applied due to network connectivity not being established until LEAP credentials are qualified. What work around(s) if any did you come up with?Thanks, Laurence

Member Since	‎10-29-2002 09:48 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5

User Statistics

User Activity

Bridging with GRE

Site to Site with PIX 515's

Re: Site to Site with PIX 515's

Re: Site to Site with PIX 515's

Re: Updating before logged on