Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,Not sure if anyone else has ran into this while upgrading their systems to CE8.3.0, but I have ran into this on every SX, DX, or MX system I have upgraded. NTP appears to not properly re-establish after the upgrade and reboot. Below are th...
Hi Schue,We ran into the same issue. We ran a standard 4 conductor plenum shielded audio cable (liberty cable) and terminated with Sound Control's RM-P20 Microphone Adapter, which worked perfectly.Here is the cable we used:22-4C-PSH-WHT - Commercial ...
If your set top box and blu-ray player both have component out, you can just use a component to hdmi converter box as component doesn't carry HDCP and the signal will pass on the codec. SIIG makes one as well as many other manufacturers out there. SI...
If you need to download the proximity app for windows please go here: https://proximity.cisco.com/I am running CE8.1.0 on an SX10 and Proximity is running great. The frame rate looks like 5-10fps, so I wouldn't expect fluid 30fps.
This definitely is possible now. You will need a Barix Instreamer. (converts audio into g.711 uLaw). Please see their guide on how to integrate:http://www.barix.com/fileadmin/data/howto/Instreamer-Cisco_application_note_v14.pdf
