Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Colleagues,I am stuck in trying to solve a TCAM/Netflow table utilization problem on 7606. I get sometimes (not the peak hours, it can happen when I have least traffic or pps) the following messages:MET_DST: %EARL-SP-4-NF_USAGE: Current Netflow ...
Dear Colleagues,how could I make a route-map to respect "continue" clause? I have already tried many IOS versions, as well as different route-map configurations. Please regard the following sample setup.two routers:AS999 (c7200-ik9o3s-mz.124-8a.bin)A...
Hi,it would be much easier to change authentication than running two ospf processes. Authentication can be implemented per-area, but overriden with per-interface configuration (ip ospf authentication in interface config mode)sample example and summar...
Hi,prepending should solve the issue with different AS_Path PA. Afterwards, one can use multipath feature.please consider the following link for a complete eBGP multipath requirements:http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a...
Hi,a good answer is at http://www.cisco.com/warp/public/473/35.htmlonly first packet will be routed, the other ones - switched, not going through SVI.best regards, anton
Hi, we have now exactly the same problem - SVI accounts twice or even less packets and bytes. I am still in research why. The issue could be IOS version, but I am not sure. The current IOS is c6msfc2-pk2sv-mz.121-19.E1Any help will be greatly appreci...
hi,if you want exclusive summarization (only these networks), than you could summarize ony to these:192.168.1.16/28192.168.1.32/27192.168.1.64/28with inclusive summary (less summaries, but other networks will as well be included):192.168.1.0/25or192....
