Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I would like to know if it is possible to connect two 1100 power supply on ws-c3850-24p-s switch and if possible to configure it with 60 watts on each port?
Thanks in advance.
Hello!
We are trying to deploy a new WLC-5508 with HA
But we are keep on failing to make a redundacy for both controllers
This is the sysinfo for the primary
Secondary
It might be the product version problem?
Please let me know , and if t...
My company bought a new cisco prime device with a part number of PRIME-NCS-APL-K9 , and 2 License PAK . one is L-PILMS42-KIT and the other one is R-PI2X-K9 . Now after initial configuration of the prime and we were able to access through browser , th...
My Switch is only poe+ , not upoe, but the power supply is more than enough for 24 ports to be 60 watts, I just dont know if the switch will support giving 60 watts on all 24 ports.
That's strange because we been using an HA unit for awhile now for redundancy without any additional license except for the first unit with 25/50/100 license on it.
Owell ill let you be updated on it once we downgrade the second unit.
Thank you s...
The secondary unit is AIR-CT5508-HA-K9 so its available for redundacy right?
and is it possible to downgrade it to 7.4.121.0 to be compatible with the first unit?
