The title of the discussion begins with CUCM 10 . . . . . maybe that wasn't clear enough? Or maybe y...

Hi All, I'm forwarding my IP Phone to my cell phone, but I would like to have the caller leave voice...

Thank you! Adding the codec line fixed it. Would you advise I complete the rest of the steps you inc...

Here there are. External cell phone calls my DID which forwards to my cell phone.

Scenario 1 works, dialing from internal Phone A with 4 digits. Scenario 2 does not work, dialing in ...

Exactly right. I dialed the 10 digit number with the 8 access code from internal Phone A. Internal P...

Excellent, here you go. The "External Phone Number Mask" is enabled on the route pattern.

Thanks for the explanation. I was able to follow those steps easily. The route pattern shows a route...

I'm afraid I don't know enough to answer that confidently. Can you direct me to figure it out?

Hi guys, Disclaimer - all I know about VoIP I've learned from Google and poking around in my CUCM 10...

That did it, finally! Removed the native vlan 3 from the switch interface. Thank you guys for some e...

Thanks Jon, Yes, the dhcp servers are also on the vlan 30 interface on the switch. In my lab, my tes...

Correct, vlan 30 is routed on the switch.

In the lab adding the static route for the vlan routed on the switch, not directly connected to the ...

Good point about the static routes, for my test case I don't believe I added them. I agree that it s...