Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am running a Catalyst 9800 WLC on 17.12.3 and have an SSID currently setup and working for local web authentication. When users attempt to connect, they are presented with the web auth portal and must enter the username and password of the guest ac...
I am just a bit confused on DHCP Proxy vs DHCP Bridging. I'll just mention in my environment all the DHCP is handled on Microsoft Windows Server DHCP servers on our local sites domain controllers. We have a DC in each site. On our core switches each ...
Is Cisco Meraki going to come out with updated Visio Stencils for newer hardware that has come out, for example the MX75?It seems they haven't been updated since some time in 2019.
Hello, What I am trying to accomplish is setting up a script that will repeatedly run sh interface interfacename every 30 seconds or so, and to take the "30 second output rate" from within that output and export it to a text file. Each time the "30 s...
Hi, I am more familiar with trunks on Meraki in which you have the ability under the option for "Native VLAN" to set "Drop Untagged Traffic" so that only tagged traffic traverses the link and anything else is dropped. How would one set this up on non...
I think you are spot on. I just checked the WLC and we are indeed using AP's in FlexConnect mode and FlexConnect Local Switching is enabled. So that explains it.
Ok but as I mentioned above though in my prod environment we have DHCP Proxy enabled, however wireless clients at Site B are still leasing addresses from Site B's local DHCP server. The WLC has no interfaces configured for Site B's DHCP server, only ...
So in DHCP proxy the client broadcasts DHCP to the AP, the AP then forwards to the WLC, and the WLC forwards to its configured Microsoft DHCP server on the respective WLC interface correct?In DHCP bridging the WLC is not involved in the DHCP process ...
Thanks @daviscot for the detailed reply. Much of what you describe are the workarounds that I have been using while patiently / hopefully awaiting a new updated official stencil set.I have not thought to use the images from the sizing tool for this...