Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have 3 x 9124AXD APs that were struck with a bug during WLC upgrade.We managed to fix them looking at this guide: https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/220443-how-to-avoid-boot-loop-due-to-...
HiWe're running a Cisco 9800-CL (17.12.3), and we offer a guest Wi-Fi.We're using the built-in "guest system" and captive portal.This is working as expected.During planned maintenance the WLC did a failover from active to standby unit.After the failo...
HiBy mistake we ordered a bunch of EWC APs - instead of the regular lightweigh/CAPWAP models.(cisco C9115AXI-E (VXE) processor (revision VXE))Earlier I have not had any problems converting them from EWC to CAPWAP, using the command: ap-type capwap.No...
HiDiscovered something strange, and unexpected today.We have multiple SSIDs. Regular company computers connect to a 802.1x enabled WLAN.Then we have different SSID/network using PSK and MAC auth.What I see is that if a computer is added to the list o...
HiSo this morning we upgraded one of our Cisco 9800-CL clusters from 17.3.5a to 17.3.6.All C9115AXI-B APs (14) on a certain site did not join after the upgrade.The pre-download went fine, but when I finally got a console to one of the missing APs it ...
I wanted to provide an update on the recent captive portal issue.I added the "wireless mobility MAC address" to the WLC cluster and performed a redundancy force-switchover. Following this, the user was able to access the captive portal, which suggest...
@Mark Elsen - it's also my impression that this mobility mac address is only important when dealing with a remote anchored WLC.As mentioned earlier, it only came up as a warning - and not an error.For good measueres I have configured it, and I will ...
