Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
UCM 4.3.2. Trying to add a new MTP (Media Termination Point). Cannot save the entry because a required field, "Host Server," has no entries from which to choose. Has anyone run into this before?
Definitely in need of some expert help on this one...Attempting to set up VPN client access on an ASA 5520 that has been used only as a firewall until now. The ASA was recently updated to Version 7.2(4).Problem: Once connected, the VPN client canno...
When attempting to upgrade the IOS version on a CMM module the session hung when erasing the bootflash. Now the module won't boot even if removed and re-inserted. Syslog contains these entries:2y7w: %ONLINE-SP-6-DNLDFAIL: Module 8, Proc. 0, Runtime...
After installing a WS-X6624-FXS card in our 6509 switch, the card was recognized by the switch but shows to be in a "PwrDown" state. I'm aware this is an old card and is EOL, but we'd like to use it if possible. Have found some notes about IOS vers...
Does anyone know if it is possible to detect the use of the "End Call" softkey function to hang up on a caller? We have some call center agents abusing this function... Trace files perhaps?
Hi Java, thanks for your reply. Do you mean it's not expected to have any more MTP's or it's not expected to have any servers listed in the "Host Server" drop-down?We're attempting to set up new SIP trunking to allow inbound SIP calls to SCCP statio...
OK, after many hours of trial and error with various cables and adapters, I can confirm that the following procedure works:1) Use a standard, Ethernet cable (straight-through, RJ-45 on each end).2) Use a generic, DB-9 Female to RJ-45 Female adapter k...
Does anyone have the actual pinout for the CMM console port? A "straight-through" RJ-45 to DB-9 cable is not working for me. The standard (blue), flat console cables do not work either, nor does a null-modem cable.None of the CMM module documentati...
Yes, I'm happy to say that we have EIGRP working nicely on our ASA 5520. It's good because it virtually eliminates routing as a variable. If something's not working, it's almost always an ACL or NAT issue now...
