Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allz,We have ASA5505. And I think flash is gone away. When i try to power on, It gives me an error "Initializing disk0: cache, please wait...Failed.". And then it starts with rommon.So whats wrong with ASA 5505, and how can i get over.Thanks in Ad...
Hi pros,I have CME 4.0 and 2811 router with several IP Phones. I have configured some of my clients in my local network as an SIP client. They will use X-lite softphone. Everything is fine, they can register and call.Then i decided to deploy X-lite t...
Hi pros,We have 2811 with CE 4.0(3) and IOS 12.4T.We have several IP Phones. All I wanna do is to integrate X-lite with cme. I followed some instruction that i saw here. Yes X-lite works almost fine. I can call outside calls and IP Phones from X-lite...
Hi,I have 2801 V with 2 analog phones attached to 2 FXS ports. also I have IP phones.When the operator who has IP Phone tries to transfer call to analog phone, busy ring tone comes.Im not sure what i should do to transfer call from IP Phones to analo...
As glan said, it should be for failover and/or load balancing. And check this out.http://www.cisco.com/en/US/tech/tk389/tk213/technologies_white_paper09186a0080092944.shtmlThis link explains basically Cisco Ether Channel Theory. Probably your configu...
