Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings, we have a client that wishes to deploy 3G GSM services to their remote offices using the HWIC-3G-GSM WIC's for the 1800 ISR's.Ive been onto Cisco.com and found the following link:http://www.cisco.com/en/US/prod/routers/networking_solutions...
Greetings, i have a 2811ISR with two HWIC-1ADSL Cards installed, each ATM and Dialer interface is in their own respective dialer groups, every day or so one of the WIC cards becomes stale and i have to shut the atm interface then bring it back up and...
Greetings, i am currently using the configuration below to provide failover between two DSL connections, all is working fine but i had expected outbound connections to be load balanced between the two DSL links on a round robin basis, however looking...
Greetings, we have a client who wishes to terminate 2 DSL links on a 2801 ISR, the client also has a number of remote branch office.They would like to terminate L2L VPN's on the 2801 for secure site to site connectivity. Branch office routers are all...
Greetings, i want to manage/monitor a customer network remotely using a L2L VPN between two Cisco ASA's.I want to allow specific traffic originating from our network (ICMP, SSH, SNMP) to be allowed onto the customer network but dont want the customer...
I completely agree, we are having alot of problems in the UK at the moment with ADSL2+ circuits not training to 800 series ISR's and 2800/3800's running the WIC and HWIC DSL interfaces.Regards
Ive currently got it running on version 4.0.18 which doesnt seem to have helped.According to Cisco this version was released to combat the interoperability problems with BT ADSL2+ enabled exchanges.The connection does only seem to hang once a day tho...
Ive gotton in touch with the ISP who are looking into the issue, until i can get it resolved would the following script work in the event of a stale connection and the SLA going down?ip sla 2 icmp-echo 213.246.177.200 source-interface Dialer1 frequen...
Thank you for your comments, indeed both DSL connections are showing high attenuation values which i assume is reflected by the distance the customer site is from the exchange.
Thank you for your time, ill drop the updated firmware on and see if things improve.EDIT: ive just connected to the FTP server, version 4.0.15 isnt avaliable anymore.I have seen version 4.0.018 knocking arround for the 800 Series Routers, this was do...