Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can I use the "tag-switching" command under interface vlan?My PE is also a CE. The PE is a 6500 connecting to multiple 3750 stacks using multiple vlans. Should I use the "tag-switching" command under each interface vlan, or under the trunk ports conn...
We have connected multiple servers on a 6748-GE_TX module and run into a lot of problems with auto-negotiation. The server was set to 1000 Full but the switch port did not detect the speed. We had to manually configure the switch ports to 1000 Full.A...
What are the equivalent commands for CSM from CSS:advanced-balance sslsticky-scrip-dstportI need to configure layer 4 or 5 stickiness on the CSM but I can not find the commands or examples.Any help I will appreciate.ThanksLoizos
What will be a good package for client that wants NAM installation and configurations other than configuring the IP and snmp and enabling http server support? I understand that educating the client how to use the NAM software (how to SPAN, capture da...
I am using NAM and nGenius on a 6509 with 720 sup module and 10 Gig links. On the nGenius software I do not see the 10 Gig links. Is it supported? If yes, what am I doing wrong?ThanksLoizos
I always thought it is harmless and transparent to configure QoS on a catalyst switch. Last week we configured QoS on every Catalyst switch in a network with 4510s sup-7, sup-6, sup V, 6509s, 3750s, and Nexus 7018s with the help of a Cisco AS expert...
We also tried auto auto on both server and switch, but still we saw no improvement.We are suspecting some auto-negotiation bug on the 7781 Compact NIC driver. Just looking for some info to support that.Thanks for the replyLoizos
