Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI've a problem on an ASA5510 with a CSC-SSM module (trendMicro). If there is http-Scanning enabled then internet radio doen't work. I worked out that if real-stream is enabled then it works fine. But if there is windows media streaming enabled then...
Hi,I'm using an ASA5510. I want enable VPN-Client Access, but there is always the Message: "Deny ip Spoof from (..) on Interface outside". I'm also not able to ping this device. ACL's are open and the command:icmp permit any unreachable outsideicmp p...
Hi,I'm not able to update (reinstall) a ASA-SSM-CSC-10 module. I used the CLI-Command : "hw module 1 recover boot". But the module is still in the Recover-mode. Output from CLI (I used the image: csc6.1-b1519.bin):Slot-1 890> !!!!!!!!!!!!!!!!!!!!!!!!...
HiI'm also using CME 4.0. Could You give me an example for a dial-peer who is working with a sip-client (x-Lite)?(Now there ist CME 4.1 available could this solve the problems with sip-client's ?)thanks a lotReto
