About fawwadasad

fawwadasad · 12-20-2006

I want to configure 2801 VGW with MGCP or H323 Protocols for CCM 4.1.3 As I have (2) 2801 VGW I need redundancy as if failure occurs in one VGW with PRI the 2nd one takes charges with 2nd PRI configured, also I have 2 PRI for redundancy As happens i...

fawwadasad · 06-21-2007

Hi,Use the below link for configuration http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml Also I used it once and it worked for me Cheers!

fawwadasad · 05-08-2007

Also check your CCM Configuration, as you have to specify in IP Phones /CCM to use that GW for outbound call through your configuration Regds,Fawad

fawwadasad · 01-13-2007

Thanks very much for your reply and guidance Execuxe me for a late reply Kind Regards,Fawad

fawwadasad · 01-10-2007

Hi,can you guide me by providing any link mentioning how to configure VG224 and see it on on CCM 4.1.3 ...AS I never worked on it before ThanksFawad

fawwadasad · 12-23-2006

Thanks for your reply I will check and get backs to you

Member Since	‎12-20-2006 07:47 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	10

User Statistics

User Activity

2801 VGW with MGCP & H323 Configuration EXP with Redundancy

Re: Auto-Attendant

Re: asyncronous routing between mgcp gateway and callmanager

Re: 2801 VGW with MGCP & H323 Configuration EXP with Redundancy

Re: VG224 SCCP Sample Configuration

Re: 2801 VGW with MGCP & H323 Configuration EXP with Redundancy