About pknudsen

pknudsen · 08-11-2016

Hi all. I have tried to do some bridging on a ASR1001-X with no luck so far. I have done this may times before on ISR-G2 routers with great success, but now I have to do it on a ASR1001-X router. The setup consist in simple terms of a ASR1001-X r...

pknudsen · 11-27-2019

Well, not quite I think:ARIN’s free pool of IPv4 address space was depleted on 24 September 2015. As a result, we no longer can fulfill requests for IPv4 addresses unless you meet certain policy requirements that reserved blocks of IPv4 addresses for...

pknudsen · 11-27-2019

And the final nail in the IPv4 coffin was slammed in this monday at 15:35 (UTC+1) on 25 November 2019 - And why..? We are absolutely, definitively, completely and utterly out of IPv4 addresses now...The RIPE NCC has run out of IPv4 AddressesToday, at...

pknudsen · 02-21-2019

Yes...And I can confirm I have the same issue on a MX84 right now - group policy works, but you cant see it - very frustrating... And if you go under the specific client and click "show details" then you can't see the rules either...And quite the sam...

pknudsen · 04-18-2018

@Terrence2 wrote:In the dashboard go to the site that you want to look at.go to network-wideIn the clients section, click on the +Add port and mac addressThe clients section will now show you the port and mac of the clients.Not quite... only for the...

pknudsen · 04-18-2018

@Philip D'Ath wrote:Cisco ASA's do not have the "show switch ..." Well... that's not correct - for your information this is depending on model of ASA:ASA5505# sh switch mac-address-table Legend: Age - entry expiration time in secondsMac Address | VLA...

Member Since	‎12-21-2006 12:53 AM
Date Last Visited	‎04-01-2020 04:53 AM
Posts	8
Total Helpful Votes Received	8

User Statistics

User Activity

Layer2 bridging on routed interface on ASR1001-X

Re: WE Need IPV6 Support in MX

Re: WE Need IPV6 Support in MX

Re: Group policy not working

Re: MX64 - how to identify which mac addresses is attached to which interface

Re: MX64 - how to identify which mac addresses is attached to which interface