About citnetworks

citnetworks · 05-17-2007

I am trying to set up a Site-to-Site VPN network. Right now I am trying to make this work in the lab. I have the Internet port on the Linksys connected directly to port 0 on the cisco which was set up as the internet port.My setup is as follows:Remot...

citnetworks · 04-20-2007

I am attempting to set up a US Robotics modem to the console port of a Cisco 837 router. I have gone through the Cabling Guide for Console and AUX Ports guide from Cisco's web site.Based on this information I was able to use a Cat5e straight through ...

citnetworks · 03-21-2007

I want to set up a VPN site-to-site network over the internet. The host site has a fractional T1 for internet access. There are 11 remote sites with no growth expected over the next several years. The remote sites have either cable or DSL internet. I...

citnetworks · 01-05-2007

I have a customer who wants to implement a VoIP solution on an MPLS network. Will the 1800 series router work in this environment or would they need a different router? If not what would be the minimum router they would need?Thanks for the help.

citnetworks · 05-31-2007

Thanks guys. What I found out was...When I ran the ASDM wizard to initially configure the ASA5505, I had my network ip addresses backwards as you pointed out. My second issue was improper configuration of my Linksys router which was also corrected wi...

citnetworks · 05-17-2007

Okay. I made the change to my remote secure group on the linksys and added that route to the cisco.Now I get the same message for both the ping from the remote laptop to the host laptop as well as from the host laptop to the remote."deny inbound icmp...

citnetworks · 05-17-2007

Thanks guys. That looks like that almost has it. I made these changes but those changes by themselves did not correct the problem. However, under the advanced settings section on the linksys, I changed the group dropdown on the Proposal section of bo...

citnetworks · 05-17-2007

Thanks guys. Still no go. I am attaching the new cisco config which includes a new error message I am now getting. I am also attaching the screenshots of my Linksys config. I was not sure how to get that in text format.Sean

citnetworks · 05-17-2007

Hi Gilbert,Do you want the actual config file as obtained via ftp or just the text printout of the config? I have attached the text printout of the config for the ASA to the post.Thanks for your help.Sean

Member Since	‎01-05-2007 08:33 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	13
Total Helpful Votes Received	5

User Statistics

User Activity

Can't establish VPN to ASA 5505

Remote Dialin via Modem

Site-to-Site VPN Hardware recommendations

1800 series router - MPLS - VoIP

Re: Can't establish VPN to ASA 5505

Re: Can't establish VPN to ASA 5505

Re: Can't establish VPN to ASA 5505

Re: Can't establish VPN to ASA 5505

Re: Can't establish VPN to ASA 5505