Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a remote branch that has a call centre (and soon a Call Manager). To reduce costs I want to connect it to an IPCC Enterprise. This is located in a different country via an E3. Rather naively I thought the only costs I would incur would be l...
I recently downloaded a fantastic document from Cisco's website that - in nice and easy English - described the common features of the Express (see attached). Perfect for a customer service manager to look at and say yes we need that.Can I find a sim...
Our current PBX system has the ability to display every agents status in our entire call environment every five seconds.Does the realtime reporting on the Express or Enterprise do something similar ? Or is there another component that performs this t...
HiI recently found a use for an old PIX 506 that I found in our store cupboard.After doing a 'show ver' I noticed that although the number of internal hosts was unrestricted, the throughout is 'limited'. The outside ethernet is registering as 10/hal...
Thanks for the reply.I managed to remedy the problem by placing a PIX 506 on the network and using dnat (using the alias command) to map an internal 10.1.xx.xxx address to the public IP address that I want the internal clients to reach.Rgrds
Thanks for the prompt reply. The statics are Ok and I used a relatively high number in the addressing using the assumption nothing would be using it.I also tried to place it within a dmz and perform a no nat operation - this didn't work either. See...
