Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all,i need some advice and perhaps some help.we have an ASA 5510 firewall installed and the light in the back next to alarm blinks green constantly when i telnet into my external internet router connected to it shows over 21000 input errors and lo...
i got this error this morning not sure why but it caused users to stop being able to access their voicemails can someone tell me why this happened and how to prevent this again? Thanks Event Type: Error Event Source: CiscoUnity_Wav Event Category: Er...
Can someone define this error for me please? Aside from the expalantion given on the page for the link given below i'm still not clear since we are not experiencing network problems, no changes have been made to the firewall recently and the network ...
Hi, can someone tell me where to find patches to fix this bug CSCed32773 Bug Details:Symptom:The Cisco Unity server may reach a state where it stops accepting valid subscribers when addressing a message. Once Cisco Unity reaches this state, any attem...
hi,where i work a phone extension was configured in the past to have external calls from a direct outside line forwarded to it. How do i remove these configurations to stop this from happening?
hey guys, since i last posted i have switched over to a new ISP...this ISP's incoming connection is terminated with a fiber connector and coming in on a fiber port of a switch...from a configured port on that switch a crossover cable is used to conne...
K...here is the output...this morning we rebooted the internet router and dc so the input errors cleared up temporarily but as you can c they are building back up...i really appreciate the help!
hi great thanks, but we tried this already. Initially we realised that we were using a straight through cable and errors were still building up so, we swapped that out and are using a cross over cable and boy...are those errors forever going up
yep i also use this method but i was searching some posts on this site and i came across a user who experienced a similar problem and this is what he said follow the link and tell me what you think...thanks so much for your help! http://forums.cisco....
