Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Comunidad, es posible utilizar las listas de control de acceso (ACL) para clasificar el tráfico y aplicar restricciones de ancho de banda, destino y vincular a QoS en el WLC 5520?
En el WLC 9800 si es posible, adjunto ejemplos:
Favor sus comentario...
Dear, I would like to ask if it is possible to make automatic reports in SNA.
Currently we generate reports manually, but our client wants to automate them.There is the mentioned process, can you share information with me, I remain attentive thanks.
Actualmente tenemos un problema de excess defer frames, revise informacion Cisco respecto a esta issue e indica que la siguiente configuración, ayuda a optimizar los búferes:
qos queue-softmax-multiplier 1200
Mi duda es el valor 1200 puede variar ent...
Consider around 20 minutes, including the reboot process, with services already restored for the C9500 stack. That duration could be declared as the downtime for that device.
@Ciro G Mele, yes, that’s correct.
The following command:install add file flash:cat9k_iosxe.17.09.04.SPA.bin activate commitperforms the upgrade process by copying the image to the stack switches and decompressing the .pkg files for execution.
Please...
@Leo Laohoo
In the description, you provide an excerpt, but it is clearly indicated that the upgrade guides must be reviewed thoroughly. Regarding opening a Cisco TAC case for support during an upgrade window, it is obviously the most effective appr...
First, you need to know how your stack is configured, whether it’s in bundle mode or install mode. Then, review the upgrade path process. Upgrade path: bundle > install > ISSU — or upgrade path: install > ISSU. Check the documentation from your equip...
Please verify which VLAN is associated with the flapping issue.After that, create a diagram showing all the devices through which this VLAN flows across all switches.This will help us get a clear view of the circuit—it should ideally form a closed lo...
