Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloTwo ASA8.2 single mode with failover. Ipsec working fine.Today installed anyconnect+mobile license.It's working fine but...does not replicate session for faliover.Example, while loggin in primary seems to send that info to secondary:%ASA-7-72004...
HelloI can not find in documentation order of operations on the interface.Everybody talks just about NAT, encryption. What about other features ?For IOS it's well known, example:http://etherealmind.com/cisco-ios-order-of-operation/What about ASA ?Tha...
HelloI have zone based firewall and policy between inside->outside and outside->inside.I have also static nat sharing inside server for outside users:ip nat inside source static inside_addr1 outside_addr1i want to accept this traffic (initiated by ou...
HelloI've installed CA on ASA and generated/send by email OTP.What is ASA web page address users need to enter to obtain cert ? (i can't find this informatin in doc)Regards,
HelloI have two remote routers - and i need to test WAN link between them. No access to other devices.I've tried to use ttcp, but it does not allow to set TOS and i can not test my QOS policies.Moreover ttcp seems to have so poor throughput, example ...
You are right - that works, but according to http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080133ddd.shtmlNAT is after input access-list. So why does router accept traffic initiated from outside to private ip address ?Why i...
I've enabled "ip tcp path-mtu-discovery" and repeated test.Receiver is cisco 2821, transmitter is cisco 3825.Total CPU value was always below 15% on both devices.Again it was very slow result ~200Kbit/s....
so - there is no way i could do a migration from one external database to another external database ?(creating gradually new users in new database and deleting them from old database) ?Thanx
Thanx for detailed description for Treat Rejects as 'authentication failed'I have one more question for Treat Rejects as 'user not found'"So - if my first external database: LDAP or AD return Treat Rejects as 'user not found'"next external database c...
