let me paste the section here for you then.
Matching community attribute
Cisco Configuration on the router
route-policy dyna-route-leak-comm-27-x
if community matches-every (65004:27) then
pass
endif
end-policy
!
vrf vrf2
address-family ipv4...
Hi Chuck,
from the logs looks like your changes didn't take effect, max number still showing the default limit.
RP/0/RSP0/CPU0:Feb 2 19:58:36.820 CST: bgp[1054]: %ROUTING-BGP-5-MAXPFX : No. of IPv4 Unicast prefixes received from [ip removed] has...
"outphysint" is for MPLS TE tunnels. By default for TE tunnels you will see the tunnel interface name in netflow record, with this option it will report the actual underlying physical interface carrying the flow
later releases you will also see a...