Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a FTD Virtual register to a FMC which I need to remove and manage as a standalone device.I delete the device from the FMC.I setup the FTD to be used as standalone as per CLI command : "configure manager local"the GUI is working and I can browse...
Hi, I try to find the info within the CCO website but fail.All docs I found on the site is Upgrading for 5.3 to 5.4 or 5.4 to 5.5In my case I would like just apply cumulutative patch to my existing 5.4 running deployment.5.4.0.46.0a to 5.4.0.46.6 My...
Hi,I had a stack of 3750 witht the latest IOS version.When I reboot the switch, I have all CDP from neighbor.After few hours, the table is empty and no way to retreive it.clear cdp, no cdp, cdp,...Nothing works.The only suitable way is to reboot comp...
Hi,We had a Cisco 3750 with a interface that encounter output drop .We change the cable, we change the interface.The traffic have the same bandwidth pattern since a long time but now we have output drop.We try to increase the output hold queue but wi...
Hi,I just receive a new Cisco 3925 with a etherswitch module 24 port : SM-ES3G-24-PI successfully boot the switch module and gain access to it.I found some documentation on CCO but I don't sorted out this small information :Switch#sh cdp neig Capabi...
Username Admin is not working either.I can't use the requested command by Sherazroot@FTDv:~# root@FP-fw:/home/admin# pmtool status | grep -i waiting-sh: root@FP-fw:/home/admin#: No such file or directoryroot@FTDv:~# /home/admin# pmtool status | grep ...
Hi Minakshi, I perform the update before your post and I test without deregister all server.So far, all was good. I had no issue and the update tooks me very less time without following the full UPGRADE procedure.The command had also a rollback for t...
Hi,I have the same kind of issue.I use the option given by jatin katyal.But I would like to have dedicated user which never expire, by example a specific login for performing backup with only the rights to perform "show running" command.So my questio...
