Hi,I have successfully installed ova of Nexus 9500v on ESXI host. I’ve been trying to create a trunk link between a nexus 9500v on ESXi to physical switch 3750X there definitely is layer two connectivity as cdp NX-OS seem to picking the phyiscal swit...
I’m having issue creating a physical connection between nexus 9000v and physical L3 switch C3750x. I have created trunk links, no L2 connectivity at all. I have tried point to point routed L3 links no connectivity. do I need vCenter in order to creat...
The last few days i have been throwing everything at the wall to try and get FlexVPN anyconnect to connect to VPN server, for love of god i cannot get past this AAA error? can anyone one help and decrypt or understand what exactly this means? many th...
Hi there, I'm not entirely sure what happened to my previous post. I hope this isn't a double post. I keep getting the following anyconnect error after entering the correct credentials:ICisco Anyconnect error: The IPsec VPN connection was terminated ...
Hi,Once I confirm certificate(self signed) and after entering credentials i get the following authentication error: I am using local AAA and credentials are correct. Any input would be much appreciated. Is this possibly a certificate error? The route...
Hi, i have no issue creating a trunk link between a physical 3750X and vswitch. Performing either Virtual Vlan Tagging(via vswitch port group) or External Vlan tagging(via switchport access method) no issues there. the issue I’m having is the nexus i...
https://community.cisco.com/t5/vpn/cisco-anyconnect-error-quot-the-ipsec-vpn-connection-was/m-p/4405754#M278557I have managed to resolve this issue and written a small write up. Anyone facing both of these issue please refer to that.
After nearly a week of investigation and headbanging! I finally got this resolved! I had to re-write my entire config! A VPN with Ikev2 requires the following:IKEv2 proposalIKEv2 policyIKEv2 Authorization Policy*IKEv2 profileIKEv2 keyring IPSec:IPSec...
What can make authorization and make authentication successful. it’s using local DB for AAA. I made sure the username and password are correct on router? However when I enter these details on the anyconnct Prompt for credentials(after accepting self ...
I have tried to delete everything in that folder and copied my xml profile again still same problem. EAP
May 18 21:19:22.187: IKEv2:(SESSION ID = 35,SA ID = 1):Stopping timer to wait for auth message
May 18 21:19:22.187: IKEv2:(SESSION ID = 35,SA I...
