Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking for a tool to manage IP addresses. The ones I've come across are EasyIP, INS, 'Men and mice' and IPTrack (open source). Can you suggest any others?Thanks
I'm trying to find out what the limits are for the software queues.....As you can see we've hit some fairly high numbers already. The PIX is a 525 6.2(2) with a 34 meg internet feed.Outsideinput queue (curr/max blocks): hardware (128/128) software (0...
We have a large number of VPN connections using the Cisco VPN client (V4) and XAUTH, I'd like to bypass the XAUTH stage for a single VPN connection/group. The remote peer will have a fixed IP address.Any suggestions?
I'm looking for some suggestions around this problem.PIX 535 using a registered IP address on the outside interface, this IP is used purely as a VPN termination end point. For historical reasons we're using a subnet not supplied by our current ISP, b...
I need to increase the bandwidth of a trunk link between a 7513 and 6509, currently there are 23 subinterfaces under a single Fast Ethernet interface which is trunked using ISL to the 6509. Each sub-interface is configured with a HSRP address used fo...
We have approximatley 6000 PC's and around 400 cisco deivces (routers/switches/firewalls etc).We just don't have the time to run OV and really that's why we opted for SNMPc. We can do everything we were doing with OV (which wasn't much) and it can sc...
We've just gone through the same exercise and at the end of a long evaluation we've opted for SNMPc by Castlerock.We currently run HP OV NNM but use very few of it's features other so this will be replaced by SNMPc.In my view you need to be a full ti...
Is 6.3 ever likely to become EAL4 compliant? I need to enable the NAT-T feature but to do that I need 6.3 which isn't yet EAL4 compliant.....Until 6.3 is given 'the nod' I can't upgrade from 6.2(2).Thanks
