Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Team,
One of our customer's currently having issue in sending logs from on premise server CSPC to Cisco SNTC portal.
SNTC Portal was not receiving any logs from their on-premises CSPC server (ver 2.10.0.1).
We did internal investigation and fou...
Hi Leo, Is there any similar bug afecting 4321 PSU - PWR-4320-AC too? We have had 5 failures in distinct locations for this power unit in last few weeks.
You mean something like this-
BOOT path-list : sdflash:ie4010-universalk9-mz.152-7.E3.bin;flash:ie4010-universalk9-mz.152-7.E2.bin ?
Another important thing to point is - They tried making flash E3 image into the boot variable like this - BOOT path-l...
Agree Leo,
I can ask customer to delete the bin files and try archive download method for the E3. Will they be able to use two boot images in the boot path after that? The switch is able to boot automatically on E3 if its is the only image in the bo...
Thanks for your reply, Leo. Thats makes sense.
I have tried setting up the Boot variable with two files but looks like for some reason its still going into "sdflash:/ie4010-universalk9-mz.152-7.E2/ie4010-universalk9-mz.152-7.E2.bin" and loading the ...
Hi Leo, One of my clients is using IE4100 switch and configured multiple boot variable images but its only booting from the existing image. Switch can take and show both the images in boot path list with a ; but only boot the existing secondary image...
