I am trying to configure a AAA configuration on cisco 9300 switch. but lost here.for line vty i need local database to be checked ( as this stack is not going to be attached with tacacs+ server)I have local enable secret password.config below is not ...
Hello, I am in a process of upgrading old cisco catalyst cisco WS-C4503-E (MPC8572). Existing Code : cat4500e-universalk9.SPA.03.02.00.SG.150-2.SG.binnew proposed Code : cat4500e-universalk9.SPA.03.08.08.E.152-4.E8.binI dont have access ...
Hello, I am looking for steps to upgrade cisco ASR 1002-x from code /asr1002x-universalk9.03.11.00.S.154-1.S-std.SPA.bin" to asr1002x-universalk9.16.09.02.SPA.bin please advise. Regards,B
Hello, Our initial plan was to add the 4th switch in an existing stack BUT now we will be replacing our 3rd stack member with new switch. the current stack has no switch priorities set. STEP -1on a new switch before connecting to the stack switc...
Hello, I am trying to add the 4th member in an existing cisco 3750 stack and then IOS upgrademy concern is no priority is set on either switch. all switches in stack ( master, standby, members) are running priority 1. when i will do the restart an...
Thank you for a detailed reply. we had two successful upgrades in recent past from code cat4500e-universalk9.SPA.03.07.03.E.152-3.E3.bin to cat4500e-universalk9.SPA.03.08.08.E.152-4.E8.bin with ROMMON 15.0(1r)SG5. Regards,
The new switch WS-C3750X-48PF-S.. the existing switch being replaced ( as 3rd member) is WS-C3750X-24P-S Existing enviroment sh licIndex 1 Feature: ipservicesPeriod left: Life timeLicense Type: PermanentLicense State: Active, In Use sh lic on a new ...
Sorry that was typo. Switch(config)#switch 4 provision ws-c3750x-48Switch(config)#switch 1 priority 15Switch(config)#switch 2 priority 14Switch(config)#switch 3 priority 13Switch(config)#switch 4 priority 12 and then Switch(config)#boot system swit...
