Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI'm having trouble finding the doc that list the maximum number of calls that a shared line can support by phone type.This doc mentions that there is a limit depending on the phone type but doesn't tell what the limit ishttp://www.cisco.com/en/U...
HelloI have had this on going problem with a Cisco 1801. It loses its connection to the ISP about 4-5 times a day. I have looked at other posts and tried the recommendations but it still happens. Can you help?1801#sh dsl int atm 0ATM0Alcatel 20190 ch...
Hi all.I have setup a vg224 using sccp and fax/modem relay. Although all of the fax machines, franking machines and most modems are working ok, we do have a problem with a few modems not working. i believe the problem maybe to do with the following a...
Can you please advise.I will be required to setup a 2xWLC 4002 for use with several 1131 LAP connecting via a 3750 stack. what would be the recommended setup for the LWAPP? would it be best to use layer2 (boh the ap manager interface in the same vlan...
Hello and ty for the replyI have downloaded and using the latest modem FW. FW Version: 3.0.33 but this has not helped with the number of drops. I will contact the telco to see if there is anything they can do to help.i did try using a basic netgear ...
Thank you RobSo if i were to use the following dhcp config, would all the 1131 ap's connect to the WLC?ip dhcp pool AP1131_DHCP_POOLnetwork 192.168.10.0 255.255.255.0default-router 192.168.10.1dns-server 192.168.8.1option 60 ascii "Cisco AP c1131"opt...
do i only need to configure option 43 within the dhcp scope with the ip address of the AP management interface for the AP to register with the WLC? some papers talk about option 60 also. Is option 60 required?Thank you againDean.
