About Pickle

Pickle · 08-08-2021

The router is C897VA-K9.I have a weird problem:When I ping via windows cmd I get sometimes regular sometimes irregular patterns:>ping 192.168.0.1 -t Pinging 192.168.0.1 with 32 bytes of data: Reply from 192.168.0.1: bytes=32 time=1ms TTL=255 Reply f...

Pickle · 08-08-2021

1 - the issue is reproducible on all ports Giga0-7It is not reproducible though with Giga8, which is port designated for WAN.2 - It won't allow me to assign an ip address to any of Giga0-7 ports. It does allow to assign ip to Giga8 port.I need vlan t...

Pickle · 08-08-2021

Unfortunately, the problem still exists. I begin to this it's somehow hardware related

Pickle · 08-08-2021

I didn't have such a cable, so made this one: TIA/EIA 568-B . But unfortunately it didn't resolved the problem

Pickle · 08-08-2021

switchport mode access vlan 1 - doesn't work. Instead I did this:Router(config-if)#switchport mode access Router(config-if)#switchport access vlan 1Router#sh vlan-switch VLAN Name Status Ports ---- --------------------...

Pickle · 08-08-2021

Nothing else is connected to the router. Yes, 192.168.0.1 is an ip of router's vlan1.I used giga8 for backing up '.bin' files. Its not needed for reproducing the issue. One thing to note that gi8 is working fine, no packet drops, that is if I ping it...

Member Since	‎08-08-2021 12:38 AM
Date Last Visited	‎08-08-2021 10:45 AM
Posts	6

User Statistics

User Activity

ARP requests toggle cisco to accept/ignore packets

Re: ARP requests toggle cisco to accept/ignore packets

Re: ARP ping toggles cisco to accept/ignore packets

Re: ARP requests toggle cisco to accept/ignore packets

Re: ARP ping toggles cisco to accept/ignore packets

Re: ARP ping toggles cisco to accept/ignore packets