Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I have configured two virtual FWs with FWSM, on one of them I am having a backup server to which the other one has access to backup data. However, 60Giga of data was copied in about 6 hours As far as I know, the throuput og the FWSM id 5.5...
Hi there,I am having an issue here with formatting this card. When I enter 'format slot0: bootflash:catxxx' (the catos file name),it starts formatting, but terminates with the following error:All sectors will be erased, proceed (y/n) [n]? yEnter volu...
...on Cat6500...can anybody help me with specifying the main differences between them? I am trying to find some useful information, but with no luck...
Good idea, I'm gonna have one, too I have tried it just yet, and the output is exactly the same as with the 'slot0:' command I have tried with as well as without specifying the bootflash image...
Actually, that was the very first thing I have tried and this is the output I have got:Console> (enable) format slot0:All sectors will be erased, proceed (y/n) [n]? yEnter volume id (up to 31 characters):Unknown device mfg id (5d.75.ffffffea)error = ...
yes, I have tried this simple form, but it requires some volume ID and I have no idea where to get it from...all I have found was that it is accessible by issuing the command: show flash m/device: filesys I cannot type in 'show flash 1/slot0: filesys...
Hi,yes, there is the required ROMMON version.Console> (enable) sh verWS-C6006 Software, Version NmpSW: 7.3(1)Copyright (c) 1995-2002 by Cisco SystemsNMP S/W compiled on Jul 8 2002, 16:10:20System Bootstrap Version: 7.1(1)Hardware Version: 2.0 Model...
