I need to enable jumbo frames on a Nexus 5548. I only need this on four 10G ports for Netapp fillers.Can I enable jumbo frames on only these ports or do I have to do this under the default class? if so will this affect traffic in the default class th...

We have started getting the following error code in our pair of 6513 core switches.'error in multicast throttle logic'The above error is being entered every few seconds.We have recently changed from sparse mode to dense mode multicast due to an appli...

I would like to set the COS of 4 to a video server that we have attached to a 6513 module WS-X6748-GE-TX.I have done this before on a 3750 by using the following commandsmls qos cos 4mls qos cos overrideHowever the 'override' option is not available ...

We have just deployed a LAN that has a pair of 6513 in the core with about 65 stacks of 3750 in the edge. The IOS version is 12.2(44)SE We have about 5000 end devices that attach to this network. These devices are mainly building management systems ...

I have a switched network that is configured throughout using PIM sparse-dence-mode which is also configured for auto RP. There are a number of configured RP groups.We would like to make sure any unauthorized multicast groups are unable to stream to ...