Hi everyone,Has anyone seen these error messages and do they suggest hw failure ?The switch stack seems to work fine except we had a crash on the problematic module (module-2) two weeks ago....we performed a hard reboot and everything wak ok. There i...
Hello,We use 15454 MSPPs (r9.0) on our network.We're interested in buying ML-MR-10 cards because it provides switching capabilities and aggregation.We want to use these cards to connect to a third-party using POS.This third-party network only support...
Hello all,3 months ago, we upgraded two ASR-100 shelves from IOS-XE "asr1000rp1-adventerprisek9.02.05.00.122-33.XNE.bin" to "asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin".Prior to the actual IOS upgrade, we had to upgrade the ROM with thi...
Hello everyone,We're deploying a brand new network for a customer. We've got problems on several ADSL links: we're having repetitive BGP Adj connect/disconnect problems.On these links I've identified around 2% packet loss....with a scheme like this o...
Hello,We're using NAGIOS to monitor the networks of our customers.We're using BGPv4 and vrf lite on many of those networks.On every remote routers, we have multiple bgp peer sessions facing two ASR-1002F backbone routers (GRT and VRFs...).I'd like to...
Hello Tom,Actually, in the documentation "Configuring POS" (which you refer to), I read that this chaoter applies to the ML-Series but only for ML100T-12, ML100X-8 and ML1000-2 cards (1st line).http://www.cisco.com/en/US/docs/optical/15000r9_0/ether...
Hello Rahul,Thanks for your answer!At the time, we had entered the command upgrade rom-monitor filename bootflash:asr1000-rommon.150-1r.S.pkg 0 which is "SPA-Inter-Processor slot 0"... I checked the possible options at the end of the command and it i...
Hello Joseph,Thanks for your answer.We've been testing some scripts and it's now working!We use the bgpPeerRemoteAddrMIB to get our ip @ and then we log any change in bgpPeerStateper ip@...An alarm is on when we have an IDLE state....Warning for the ...
Hello,Thanks for your help!It's working!Now that I have my basis, I'll try to configure some other probes like udp-jitter... and see what Centreon (Nagios) can do with that! BRGs,KatyC1812#sh ip sla history Point by point HistoryEntry = Ent...