About sateeshk10

sateeshk10 · 01-11-2024

Hi,I have situation, need to replace existing cisco nexus switches with different models , VPc`ed and VXLAN fabric My question, as soon as we replace the switch because of compatibility issues VPC never forms because of different models am look...

sateeshk10 · 08-18-2021

Hi guys, Did any one tried CSR in TGW setup if so, assuming we don`t need IAM policy for route table change during HA event ?The videos shown in YouTube for Ha is without TGW so, i am think with TGW should be bit different for HA setup , don`t need ...

sateeshk10 · 03-10-2020

Hi, I am running two OSPF routing process on the same router, one process towards core and receiving default route (110) from core and i am running another process in totally stub area which in turn generating default route (108) towards down net...

sateeshk10 · 06-21-2019

I am testing scenario in the LAB , here is the my setup A (pair) < eBGP > B(pair) <iBGP>C (pair) < OSPF stub area> D (pair) Looking for best configuration for C switch pair where the IBGP to OSPF and OSPF to IBGP takes place and should avoid any ki...

sateeshk10 · 09-06-2017

Hi, I need quick configuration on qos marking i.e whatever the traffic is coming in interface(any traffic) should mark with high prioty. please crorrect me: Ip access-list test permit any any class-map match-any test-class match access-group name te...

sateeshk10 · 01-11-2024

Thanks Balaji and appreciated ..But am not sure this solution works for VXLAN setup because he says STP priority to be high but i don`t see stp priority configured in vxlan network The replacement Switches should have a Higher (less preferred) STP P...

sateeshk10 · 07-08-2020

Hi Giuseppe, I do agree with you but the same scenario is working production so, that leads me to start this thread :)Off course, if we change AD on OSPF 1 process, sure will work but how it is working in production is question for me, i have configu...

sateeshk10 · 07-07-2020

Hi Giuseppe, I have tried to simulate the same in LAB, it preferring default originated by stub network, not preferring core network default route(attached configuration files) .. B1 router vlan 100 - ruining ospf with down steam (server ruining OSPF...

sateeshk10 · 07-01-2020

Sorry to bother you again and again.. his is what happen on the B pair of devices that advertise an LSA type 3 0.0.0.0/0 into totally stub area in OSPF process 20, but this entry does not compete with the received LSA type 5 in OSPF process 10 - Mean...

sateeshk10 · 06-29-2020

Thanks Giuseppe and appreciate! I forgot to mention one more point , when i re-distribute OSPF20 into OSPF10(towards core) , denying default and redistributing other routes - That might helped to ignore OSPF20 default route installation in RIB ? He...

Member Since	‎08-18-2008 04:19 PM
Date Last Visited	‎01-12-2024 12:06 AM
Posts	285
Total Helpful Votes Received	5

User Statistics

User Activity

solution for replacing nxos switches

quick question CSR on AWS with TGW setup

Query on routing process

Quick question on Route redistribution between two routing protocols

QOS on nexus 9000

Re: solution for replacing nxos switches

Re: Query on routing process

Re: Query on routing process

Re: Query on routing process

Re: Query on routing process