We would like to use EIGRP with the NCS-5501-SE butRP/0/RP0/CPU0:router(config)#router ?amt Automatic Multicast Tunneling (AMT)bgp BGP configuration subcommandshsrp HSRP configuration subcommandsigmp IPv4 Address Familyisis ISO IS-ISlisp LISP configu...
We have a 4507r that routes multicast at layer 2 because of our particular setup. We are sending multicasts of video streams to remote locations and to do the transport we are using a product called a ITU and it only transmits and doesnt have 2 way c...
I have 2 asa 5510 that I upgraded to security plus license. Im suppose to have 3 10/100 and 2 10/100/1000 interfaces. which one are the gig interfaces. not of the ethernet or management can be set faster then 100Mbps
I am upgrading my CNR 5.5 to 6.0 to then upgrade it to 6.2.2.When I finished my upgrade form 5.5 to 6.0 it asked me to reboot which i did. When I conntect to the cnr via command line once rebooted it tells me my license is invalid or expired. So I us...
It says in the min req you need red hat ent 3.0. Can we use Red Hat ent 5? since 3.0 is quite old. Also are we stuck with Redhat or we could use debian or another linux flavor
Thats is because that feature navigator tool is not complete. its missing many cisco product. Here is the link to the doc i said which talks of eigrp on NCS5500 family. Also not that EIGRP is a cisco protocol and should be support on every cisco prod...
The problem is you can not change the ip and default route at the same time in one shot. The way I go around changing ip of a wan interface without getting locked out is having 2 sources to come from. You can add a static route to destination B which...
Thanks for my solution to problem number 2 Mohamed. This will most probably work. Now back to problem number 1, The 4507 is in one location recieving the streams then it actually dispatches those stream to the right SEMS(the devices that will then se...
well i turned off igmp snooping since nobody will ever send a join. and no one is connected to the 3750. in the 3750 which recieved multicasts from the 4507 I have a bunch of SEM devices which are devices which listens to a multicast then formats tha...
