Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We had several radius servers over the years and currently we have two left with radius server index of 5 and 8. We did cleanup work and removed both but added them back as radius server index 1 and 2 and authentication broke after mapping it back to...
The rule of thumb is or was the wlan being anchored must be identical on both foreign and anchor, correct? Third party AAA(forescout) is wanting layer 2 security mac filtering on foreign and layer 3 security on anchor(that would mean wlans are not id...
On a 2504 running 8.3.102 if one wants to create a wlan with wlan ID starting at 17(to bypass default AP-Group), how does one accomplish that? Once that is created, I can map it to AP Group but can't create it in the first place cuz i am limited to ...
We swapped out 3502s for Meraki MR32 and aeroscout tags for temperature monitoring stopped working. Meraki TAC did not have much of an insight. Hopefully someone on here has had that experience and can offer some suggestions. We have backed out and r...
I can't seem to get any feedback on small cells from forums...If one inserts the cisco 5310 into a 3600 what other equipments are needed to roam seemlessly between 3G and wifi, such as switches and routers that have protocols in their IOS for gsm an...
Yes, on the anchor I have pre-auth acl on L3. I was just concerned that on foreign I have L2 mac filtering, making the configs on foreign different from anchor, but if I understand you correctly, for wlan in question I can do L2 mac filtering on fore...
There is a pre-auth acl I configured that needs to be applied and that canbe applied under layer 3 or wlan interface(but wlan interface will not behelpful for pre-auth) hence I need to apply it under layer 3. What are myoptions to get this pre-auth a...
With a large rock huh, Lmao. Let me clarify...I want to create 10 wlans starting with wlan ID 17. I dont want to use 1 through 16 cuz APs will fall into the default group. Can one create a wlan starting with 17?
