Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have configured about 200 VG ports on multiple VGs accross a campus. I need to change the descriptions on these port and would like to find a way to bulk these. I can do an export phones by selecting the directory number (range) and get all the VG ...
I have a UC540 with an internet connection/firewall and 5 SPA phones on the inside running fine. I want to configure a phone that can be used at a remote site over an internet connection and have an extension on the system. It would be one that you c...
I have a PRI into a 2921 router and need to split into DiD to phones and DID/FAX to a TCL script. The PRI is sending 4 digits....so to get to phones...that's easy...do nothing!!!The fax numbers are in the same range so i need a way to identify them ...
I am getting error messages for clients:11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0 12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16...
I have 1300 bridges in station root and non-root mode and all the vlans can communicate across it with address assigned. But when a new unit (pc or phone) is attached.....the DHCP broadcast does not get sent across the wireless link to the DHCP serv...
This does not have to be a secure connection.....Just use the internet as a transport.Can that be configured in the phone thru staic configuration?And what ports need to be opened up on the firewall of the UC500?ThanksJohn
Version 12.4(3g)JA1 is the IOS I am using...am going to check the bug tool kitThe addressing issue is correct.....that is a typo.....good lookin out!!!!Thanks
