I'm doing ASA code upgrade with contexts from 8.2.5 to 8.4.5 to 9.0.3 and I'm concerned about the NAT syntax with the new code. Should this automatically changed to the new syntax on all contexts or I have to do it manually. Anyone there with that ...
Hey guys,I have verizon wireless router to connect to the internet via FIOS. The public IP on the wireless router is DHCP assigned. I have my home lab with cisco 2511 and octal cables. I would like to be able to access the terminal server remotely vi...
I received cisco router 3620 from a friend. I booted and got to the # sign mode. After a few minutes while checking the config. file, I noticed a sudden change on the console screen "System Bootstrap, version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFT...
I tried to login to my vpn concentrator today and got "page could not be displayed" The url is https://a.b.c.d/admin and I get prompted with the certificate window and when I click yes it goes to " page could not be displayed " I have tried so many t...
I have a remote VPN configured in my ASA firewall with a VPN group of users configured on the external ACS. The group called VPNASA authenticate thru the ACS server and the ip pool server is on the ASA firewall. Now my boss asked me to configure a se...
Richard,I appreciated it. Verizon might be able to assign me /30 subnet so I can have two usables. If they cannot, port forwarding is possible but I'm not sure if Verizon wireless router will do port forwarding to a different IP. Yes it can do same ...
Reza,I tried many times pressing the "pause" and nothing, can't get into rommon mode. What this could be ? The funny thing it was working at the # mode and then suddenly the bootstrap message keeps appearing. Any help to recover will be appreciated....
Reza,Thank you. I tried last night and I could not get into the rommon mode. I hit the "break and control" key and got the below error*** CPU Out-of-range Interrupt ***Access address high = 0xa, low = 0x66887f80PC = 0xbfc09f94, Cause = 0x4000, Status...
Rob,Thank you. I tried last night and I could not get into the rommon mode. I hit the "break and control" key and got the below error*** CPU Out-of-range Interrupt ***Access address high = 0xa, low = 0x66887f80PC = 0xbfc09f94, Cause = 0x4000, Status...
