Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 3845 connecting to a 2811 through GRE tunnel. The GRE tunnel from the 3845 will pass through a ASA5520 to encrypt the GRE tunnel into an IPSec tunnel terminated on the 2811.Occassionally, there is a drop to the tunnel interface independent ...
I have a C2950SX-48-SI running Version 12.1(22)EA4.Data sheet shows it support PVLAN.When I try to setup PVLAN with the switch, it gives me errors:Unimplemented Function: pm_platform_vlan_set_pvlan_typeUnimplemented Function: pm_platform_vlan_set_pvl...
It is not the CA or local cert that I need to push out to user. It might not be a problem for devices that does not validate server certificate. In windows 7, when I first connect to a wireless SSID, it automatic create a wireless profile and detec...
Actually, I have the same problem.The certificate is used for PEAP authentication so that the WIFI client can verify the server identity.Since it is a cluster setup, when I install the certifcate on one ACS and the name got replicate to the other clu...
You can exclude the QoS configuration. I have checked the service policy and there is no packet drop there and I have even tried to remove QoS completely and the problem still exists.
I have enabled keepalive on the tunnel interface and it does not help. Actually, the log did not show there is any interface shutdown or lost of routing neighbour relationship. The physical interface does not show any drop either.
