Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello - I'm very new to the Nexus OS and I am trying to setup multicast. I found out that you no longer need to enable multicast by doing "ip multicast-routing" that you would just need to do "feature pim". Now I'm trying to enable bidir, in CatOS th...
I am trying to connect a 3560 poE-48 switch to a 2811 using one of the integrated ethernet ports. I was trying to set up this port as a regular switchport access port, but I do not have that option. I currently have it set up:interface FastEthernet0/...
I have two 6509's that are configured for VSS. The 6509's act as Router/Switch, have servers on my backup network that are physically connected to this VSS. However, I am having problem being able to ping SOME of these servers, I can arp but not ping...
I am trying to understand how mulitcast works and have read a few documents out there. We have a 6 servers that requires mulitcast, however we do not feel comfortable doing this on our catalyst 6509 because it's our main switch/router and the servers...
Hello, I am having issues trying to convert from autonomous to lwapp. This is the first time working with this model, we have 1242's which are lwapp and working fine. The version I have is 12.4(10b).JA1 but when I use the upgrade tool and try to use ...
Thanks for the link - I think I have it all configured correctly, but I am trying to do a basic test by pinging the multicast group address and I get "ping: either multicast replicate flag or source interface needs to be specified" on the Nexus. I d...
Thanks Amit,Currently the switch is not plugged in but we are in need of more ports for new devices that will be deployed in a couple of weeks. And we will need more than 9 ports that is why we are putting a 3560. I will have the switch installed an...
HI Amit & Joseph, Thanks for your quick response - the objective is to get them more ports for end devices for this site - this router already has a 16 port hwic. The idea was to daisy chain this 3560 to the router. Joseph - so I should just move all...
Shutting down one of the links to one of the core's did not solve the issue. Something else I did notice is that when I do a sh mac-address address on the vss I get the following:For server that works fine - Supervisor switch 2 Module 5* 951 78e7.d...
The servers have two NICS, one is for production network and the second is for the back up network - which are two completely ip networks.Primary Network: 10.74.10.X/24Backup Network: 10.74.251.X/24The management IP of the VSS is on a 172.18.8.X/24 N...
