Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm setting up a new server (Dell PE R730 with vmWare Esxi6) for Etherchannel on 2 of it's ports yet it's failing in a wierd way. I've done this before without any problems but when I plug both connections in it pings back fine locally, yet fails...
Hi, got a problem thats driving my nuts so need some advise. I have two office spaces (call them Office-A and Office-B) about 150 feet apart. Office-A has 5 x c3650-48tq switches stacked via stacking module with 3 x Meraki MR18 AP's coming off them. ...
Hi, hoping someone can help with this irritating problem I've got!
My current office has 5 x Cisco 3650 switches stacked together (via stacking module) that services what I will call Office-A. I need to connect these via OM4 MM fiber cable to a new f...
hi, sorry for the delay (busy at work with other things).
I finally got around to switching on vtp domain and the vlans are showing up on the other side now. i still have an issue with the AP's not picking up internet traffic automatically (requires ...
ok thought to hell with it dropped what i was doing and did it anyway. still no joy. I've even put the Office-B switches into transparent mode when manually assigning vlan2 to the wifi port and although it shows up correctly on 'show vlan brief' ther...
Heres the counters from Office-A, I've troed putting the Office-B switches into transparent mode and manually setting them to vlan2 which has a partial effect. Vlan2 is present and you can add an interface to it, but its not making a connection back ...
bizarrely enough I do actually have to create a vlan today for vsphere so this will kill two birds with one stone. i'll let you know the results asap
