ā09-13-2016 05:14 AM - edited ā03-08-2019 07:24 AM
Hi, hoping someone can help with this irritating problem I've got!
My current office has 5 x Cisco 3650 switches stacked together (via stacking module) that services what I will call Office-A. I need to connect these via OM4 MM fiber cable to a new floor space 150 feet away which I will call Office-B. This office has 2 x 3650's stacked via stacking module again. Checking the interfaces Office-B's switches they can see each other ok, so I'm using Cisco branded SFP's to connect the fiber back to Office-A with the below configuration from Office-B's switch-1 to Office-A's Server switch:
#vtp mode client
#interface t1/1/1
#switchport mode trunk
#switchport trunk allowed vlan all
#switchport trunk native vlan 1
#no shutdown
However I cant get a connection to form between the stacks. I know the fiber is working ok (a Netgear switch is able to connect instantly to its neighbour without any problems) so what am I missing? I've attached a crude Visio of what I'm attempting.
Many thanks
Solved! Go to Solution.
ā09-14-2016 01:21 AM
the 10gbs should work 3650s don't support the other type
I believe these mods are the same as 3850 and theres specific pisrt for 10gb have you tried the below if your 10gb ?
Catalyst 3650 Series |
|||
Network Device |
Transceiver Model |
Minimum Software Release Required |
|
DOM Support |
Software Release |
||
WS-C3650-24TD WS-C3650-48TD WS-C3650-24PD WS-C3650-48PD WS-C3650-48FD WS-C3650-48FQ WS-C3650-48PQ WS-C3650-48TQ WS-C3650-24PDM3 WS-C3650-48FQM3 WS-C3650-8X24UQ3 WS-C3650-12X48UQ3 WS-C3650-12X48UR3 WS-C3650-12X48UZ3 |
SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M |
ā |
XE 3.3.0SE |
SFP-10G-SR SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S |
XE 3.3.0SE |
XE 3.3.0SE |
|
SFP-10G-ZR SFP-10G-ZR-S DWDM SFP+ |
XE 3.3.3SE |
XE 3.3.3SE |
|
CWDM SFP+ |
XE 3.7.0E |
XE 3.7.0E |
|
SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M |
ā |
XE 3.6.0E |
|
SFP-10G-BXD-I SFP-10G-BXU-I SFP-10G-BX40D-I SFP-10G-BX40U-I |
XE 3.7.1E |
XE 3.7.1E |
ā09-13-2016 05:40 AM
Hi
Are the interfaces up/up on both sides yes ? can you post them
if there up do you see cdp between them ? and if up what does show int trunk provide each side
ā09-13-2016 05:47 AM
Hi Mark, no the interfaces arent up at all. The status lights are dead and dont respind when I plug the SFO's in. I know the fiber works as a netgear switch used for lining the voip networks between office (on fiber patch port 3) works ok. When I plug the Cisoc switches into that port on either end they stay dead.
ā09-13-2016 06:01 AM
Hi
whats the sfps that you are using and what ports exactly on the module are you connecting them to
can you post the show inventory
ā09-13-2016 11:25 PM
ā09-14-2016 01:21 AM
the 10gbs should work 3650s don't support the other type
I believe these mods are the same as 3850 and theres specific pisrt for 10gb have you tried the below if your 10gb ?
Catalyst 3650 Series |
|||
Network Device |
Transceiver Model |
Minimum Software Release Required |
|
DOM Support |
Software Release |
||
WS-C3650-24TD WS-C3650-48TD WS-C3650-24PD WS-C3650-48PD WS-C3650-48FD WS-C3650-48FQ WS-C3650-48PQ WS-C3650-48TQ WS-C3650-24PDM3 WS-C3650-48FQM3 WS-C3650-8X24UQ3 WS-C3650-12X48UQ3 WS-C3650-12X48UR3 WS-C3650-12X48UZ3 |
SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M |
ā |
XE 3.3.0SE |
SFP-10G-SR SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S |
XE 3.3.0SE |
XE 3.3.0SE |
|
SFP-10G-ZR SFP-10G-ZR-S DWDM SFP+ |
XE 3.3.3SE |
XE 3.3.3SE |
|
CWDM SFP+ |
XE 3.7.0E |
XE 3.7.0E |
|
SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M |
ā |
XE 3.6.0E |
|
SFP-10G-BXD-I SFP-10G-BXU-I SFP-10G-BX40D-I SFP-10G-BX40U-I |
XE 3.7.1E |
XE 3.7.1E |
ā09-14-2016 01:59 AM
great good stuff :)
ā09-14-2016 01:56 AM
HI, fixed it! I had the sfp in port 1 instead of port 3 or 4 which is for 10gb modules. As soon as I plugged it in there it came up!
ā09-13-2016 06:44 AM
Hello
If your configuration is correct and you still have no physical connection - Try swapping the fibre strands of the fibre cable around at one end of the connection
res
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide